RG-RS250R Hybrid Engine
Brant Baughan decided to put NX5 RS250R barrels on top of an RG crankcase. Here are some early pics of that project. The engine is now in other hands.
007_07.jpg
021_21.jpg
022_22.jpg
024_24.jpg
adapter plate rear.jpg
adapter plate top.jpg
after machining.jpg
bottom.jpg
Cylinders.jpg
Front.jpg
GEN I cylinder front.jpg
GEN I cylinder.jpg
GEN II cylinders installed.jpg
Left side small.jpg
Left.jpg
Porting 1.jpg
Porting 2.jpg
Porting 3.jpg
Rear Caliper 1.jpg
Rear Caliper 2.jpg
Rear carrier and Caliper.jpg
rear end.jpg
Rear.jpg
RS master cylinder.jpg
Shifter support.jpg
Stroked cranks.jpg